Delfield Refrigerator SARRI1 G User Manual

®
Project __________________________________  
Item ____________________________________  
Quantity ________________________________  
CSI Section 11400  
Delfield  
Approved _______________________________  
Date ____________________________________  
Specification Line®  
Self-Contained Glass Door Refrigerated Roll-In  
Models  
One section Two section Three section  
SSRRI1-G  
SARRI1-G  
SMRRI1-G  
SSRRI2-G  
SARRI2-G  
SMRRI2-G  
SSRRI3-G  
SARRI3-G  
SMRRI3-G  
Stainless exterior and interior glass full door  
Stainless exterior and aluminum interior glass full door  
Stainless front aluminum exterior and interior glass full door  
Options &  
Accessories  
Standard Features  
Stainless steel interior and exterior (SS)  
Stainless steel exterior, aluminum interior  
(SA)  
Security (prison) package  
Incandescent light  
Door field rehingability  
Stainless steel back  
Laminate on front, sides and back  
Bottom mount electrical  
Stainless steel banking strip  
Heat shield end  
Aluminum interior and exterior, stainless  
front (SM)  
Built in door locks with heavy duty strikes  
Pressure relief valve is standard to prevent  
door vapor lock  
Exterior digital thermometer with high/  
low temperature alarm  
230-50-1 electrical  
220-60-1 electrical  
Easy to use electronic control  
Easy access “flip upshroud  
10attached cord and plug on 115V units  
Stainless steel breaker strips  
High density foamed in place  
environmentally friendly, Kyoto Protocol  
Compliant, Non ODP (Ozone Depletion  
Potential), Non GWP (Global Warming  
Potential) polyurethane keeps energy  
costs low  
SSRRI2-G  
Energy savings door heater switch  
Two year parts & labor warranty  
Five year compressor warranty  
Specifications  
Exterior: SS and SA models shall have corrosion resistant stainless  
steel exterior cabinet sides, front and shroud. SM models shall have  
corrosion resistant aluminum on exterior cabinet sides and will have  
stainless front and shroud. All units shall have the upper shroud  
hinged with a gas assist stay open feature to provide easy access to  
the refrigeration system.  
Refrigeration system: All components are mounted to the exterior  
of the cabinet ceiling, outside the food zone and are assembled  
as one piece and can be removed as one piece. Environmentally  
friendly R404A refrigerant is used. The system has the capability  
of maintaining between 27ºF and 40ºF in heavy use food service  
operations. Refrigerant is metered using a highly responsive  
thermostatic expansion valve. System is controlled using Delfield’s  
ACT-Advanced Control Technology electronic temperature control,  
which provides improved pull down times, reduces compressor  
cycling and longer compressor life with lower energy consumption.  
Interior: Cabinet interior shall be corrosion resistant stainless steel  
(SS models) or heavy gauge aluminum (SA and SM models). Bottom  
and top surfaces shall be die stamped to provide radius corners and  
recessed floor. Mounted to the interior ceiling, the interior fluorescent  
light is controlled automatically through a switch mounted in the  
hinge assembly to protect against breakage. Door openings are  
protected with heavy gauge stainless steel breaker strips. An air  
duct shall be mounted to the ceiling assuring low velocity, even air  
movement throughout the cabinet interior.  
Control system uses adaptive defrost to assure evaporator coil is free  
of ice and is operating at optimum efficiency. Evaporator condensate  
is eliminated using an energy efficient hot gas system.  
Electrical: Standard Electrical on one and two section units shall  
be 115V, 60 Hz single phase. A 10cord and plug is supplied and  
attached to a junction box mounted on the exterior top of the  
cabinet. Three section units shall be 115/208-230 and will require  
hardwire connections.  
Each section can accommodate a 28 1/2x 27 1/4x 72cart.  
Doors: Double paned tempered thermopane glass. Constructed with  
a combination of extruded aluminum and PVC. Each door has two  
edgemount, self-closing, cam lift style hinges. Doors can be removed  
from the cabinet without the use of tools. Door handle is continuous  
along vertical dimension of the door. Door gaskets are magnetic and  
mount to the door, snapping in place and removable with out tools.  
Keyed door lock is mounted to the door. Lock engages into a heavy  
duty strike mounted to the cabinet face.  
980 S. Isabella Rd.  
Mt. Pleasant, Michigan 48858  
Fax: 800-669-0619  
Phone: 800-733-8948 or 989-773-7981  
 

Cognitive Solutions Scanner 4886381 User Manual
Cornelius Beverage Dispenser CCM322 522 User Manual
Cornelius Beverage Dispenser Ice Drink Dispenser with Flavor Shot User Manual
Crate Amplifiers Musical Instrument Amplifier GLX120 User Manual
Curtis Flat Panel Television LCD2424A User Manual
Danby Microwave Oven DMW758BL User Manual
Dimplex Electric Heater APL150 User Manual
Elation Professional Work Light PRO FS User Manual
Electro Voice Microphone N D157B User Manual
GE Monogram Outdoor Kitchen Island 36 48 User Manual